Specifications

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
To avoid the system unstability after clearing CMOS, we recommend
users to enter the main BIOS setting page to “Load Optimal De-
faults” and then “Save Changes and Exit”.
Jumper Settings
Jumper
Type
Description
Setting (default)
CLR_CMOS 3-pin
Clear CMOS
Before clearing the
CMOS, make sure to
turn off the system.
BIOS_WP 2-pin
BIOS_WP
OPEN: FLASH WRITE
UNPROTECTED
SHORT: FLASH WRITE
PROTECTED
CLR_CMOS
1
BIOS_WP
1-2: NORMAL
2-3: CMOS CLEAR