Specifications

5
Introducing the Motherboard
Table of Motherboard Components
1 CPU Socket LGA775 socket for P4/Celeron D CPUs
2 CPU_FAN CPU cooling fan connector
9 SATA1~2 Serial ATA connectors
7 CLR_CMOS Clear CMOS jumper
4 ATX1 Standard 24-pin ATX power connector
10 PANEL1 Front Panel switch/LED header
15 PCI1~3 32-bit add-on card slots
LABEL COMPONENT
6 IDE1 Primary IDE channel
3 DDRII1~2 240-pin DDR2 SDRAM slots
17 SYS_FAN System cooling fan connector
6 IDE2 Secondary IDE channel
11 USB 3/4 Front Panel USB headers
8 BIOS_WP * BIOS protect jumper
13 AUX IN audio input
This concludes Chapter 1. The next chapter explains how to install the motherboard.
Users please note that DDR & DDR2 can’t both be applied at the same time on
this motherboard. Users can use DDR2 memory modules only!
14 AUX_OUT Auxiliary audio output header
18 ATX12V Auxiliary 4-pin power connector
16 AGP Accelerated Graphics Port slot
* Stands for optional components
12 FDD Floppy diskette drive connector