User`s manual

BIOS Setup
33
IDE Primary Master/Slave, Secondary Master/Slave
Press Enter to enter the sub-menu and the following screen appears:
The specifications of your drive must match with the drive table. The hard
disk will not work properly if you enter incorrect information in this category.
Select
Auto whenever possible. If you select Manual , make sure the
information is from your hard disk vendor or system manufacturer.
IDE <Primary Master> The name of this menu item will match the name of the
menu. The settings are None, Auto, Manual.
Access Mode The settings are CHS, LBA, Large and Auto.
Capacity Formatted size of the storage device.
Cylinder Number of cylinders
Head Number of heads
Precomp Write precompensation
Landing Zone Cylinder location of the landing zone
Sector Number of sectors
PIO Mode The settings are Mode 0/1/2/3/4, Auto.
Ultra DMA Mode The settings are Disabled and Auto