User`s manual

3-24 Chapter 3
3-7. PnP/PCI Configurations
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Resources Controlled By [Auto] Item Help
x IRQ Resources Press Enter
PCI/VGA Pallete Snoop [Disbaled]
Allocate IRQ to Video [Enabled]
Allocate IRQ to USB [Enabled]
PIRQ_0 Use IRQ No. [Auto]
PIRQ_1 Use IRQ No. [Auto]
PIRQ_2 Use IRQ No. [Auto]
PIRQ_3 Use IRQ No. [Auto]
PIRQ_4 Use IRQ No. [Auto]
PIRQ_5 Use IRQ No. [Auto]
PIRQ_6 Use IRQ No. [Auto]
PIRQ_7 Use IRQ No. [Auto]
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Resources Controlled By:
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto(ESCD)]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the “IRQ Resources” menu.
 IRQ Resources:
This item sets each system interrupt to either [PCI Device] or [Reserved].
PCI/VGA Palette Snoop:
This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not.
[Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA.
[Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA.
Allocate IRQ To Video:
This item assigns an IRQ for the VGA card installed.
[Enabled]: Automatically assign an IRQ for the VGA card installed.
[Disabled]: The IRQ that was previously occupied by the VGA card will be available for new device.
KW7 Series