User`s manual
3-22 Chapter 3
IRQ/Event Activity Detect:
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect
Power On Function [Button Only] Item Help
X - Hot Key Power On Ctrl-F1
X - KB Power On Password Press Enter
X - PS2 Mouse Wakeup Disbaled
Resume by OnChip USB [Disabled]
Wakeup by PME# of PCI [Disabled]
Resume by Ring [Disabled]
Wakeup by Alarm [Disabled]
X - Date (of Month) 0
X - Resume Time (hh:mm:ss) 0: 0: 0
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Power On Function:
Four options are available: Hot Key Password Mouse Button Only. The default setting is Button
Only. This iten allow you to choose the computer power turn on method you like. Some item you choose,
some of the following items will be available to let you making further setting. For instance, when you set
this item to Password, the item of “KB Power On Password” will allow you to enter password. When
you set this item to Hot Key, the item of “Hot Key Power On” will allow you to choose the hot key you
want. If you choose Mouse, you can press any key on mouse to turn on the computer power.
NOTE: To enable this “Power On” function, the wake-up header of [PS2-PWR1], [USB-PWR1],
[USB-PWR2] must be set to [Enabled] position. Please refer to the configuration of “Wake-up Header”
[PS2-PWR1], [USB-PWR1], and [USB-PWR2] in section 2-4, chapter 2.
The mouse wake up function can only be used with the PS/2 mouse, not with the COM port or USB type.
Some PS/2 mice cannot wake up the system because of compatible problems. If the specs of your
keyboard are too old, it may fail to power on.
Hot Key Power ON:
This item powers on the system by pressing <Ctrl> key plus one of each function key (<F1> ~ <F12>)
simultaneously.
KB Power On Password:
When you perss the <Enter> key, then you can enter the password you want. When set be done, you need
to saving and leave the BIOS setting menu to reboot your computer system. Next time when you
shutdown your computer, you can’t use the power button to turn on the computer power anymore.
You need to press the password to turn on your computer power.
KW7 Series