User`s manual

BIOS Setup 3-21
3-6. Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type [S1(POS)] Item Help
MODEM Use IRQ [NA]
Power Button Function [Instant-Off]
Run VGABIOS if S3 Resume [Auto]
► IRQ/Event Activity Detect [Press Enter]
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(POS)]: Enables the Power On Suspend function.
[S3(STR)]: Enables the Suspend to RAM function.
MODEM Use IRQ:
You can specify the IRQ for modem use. Eight options are available: NA  3  4  5  7  9  10
 11. The default setting is NA.
Power Button Function:
This item selects the method of powering off your system:
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will
prevent the system from powering off in case you accidentally hit or pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the
system.
Run VGABIOS if S3 Resume:
Three options are available: Auto  Yes  No. The default setting is Auto. This item can let you choose
when S3 resume active, the VGA BIOS need to be initiative or not.
User’s Manual