Specifications
- 40 -GA-7VT880 Serise Motherboard
English
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS (Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR (Suspend To RAM).
USB Device Wake-Up From S3
Disabled Disable this function. (Default value)
Enable Enable USB device wake up system from S3 suspend type.
Power LED in S1 state
8Blinking In standby mode(S1), power LED will blink. (Default value)
8Dual/Off In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Soft-Off by PWRBTN
Instant-off Press power button then power off instantly. (Default value)
Delay 4 Sec. Press power button 4 seconds to power off. Enter suspend if button is
pressed less than 4 seconds.
AC Back Function
Soft-Off Always in off state when AC back. (Default value)
Memory System power on depends on the status before AC lost.
Full-On Always power on the system when AC back.
Keyboard Power On
Disabled Disabled this function. (Default value)
Password Enter from 1 to 5 characters to set the keyboard power on password.
Keyboard 98 If there is a "POWER" button on your keyboard, you can press the key to
power on your system.
Mouse Power On
Disabled Disabled this function. (Default value)
Enabled Power on system by mouse event.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)]
x USB Device Wake-Up From S3 Disabled
Power LED in S1 state [Blinking]
Soft-Off by PWRBTN [Instant-Off]
AC Back Function [Soft-Off]
Keyboard Power On [Disabled]
Mouse Power On [Disabled]
PME Event Wake Up [Enabled]
ModemRingOn/WakeOnLan [Enabled]
Resume by Alarm [Disabled]
x Date (of Month) Alarm Everyday
x Time (hh:mm:ss) Alarm 0 : 0 : 0
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level}
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
Power Management Setup