Product specifications

VT8237R Data Sheet
Revision 2.06 December 15, 2004 -161- Device 18 Function 0 LAN Registers
Offset 84 – MII Interrupt Status (00h).........................RWC
The bits in this register correspond to bits in the MII Interrupt
Mask register (Rx86). An interrupt is generated when
corresponding bits in both registers equal one.
7 Power Event Report in Test Mode (RO)...... def = 0
6 User Defined Host Driven Interrupt ............ def = 0
5 Reserved ........................................ always reads 0
4 Suspend Mode MII Polling Status Change.. def = 0
3 Transmit Data Write Buffer Queue Race.... def = 0
(will be set by transmit shutdown)
2 Reserved ........................................ always reads 0
1 Soft Timer 1 Timeout .................................... def = 0
0 Soft Timer 0 Timeout .................................... def = 0
All bits above: write 0 to clear the interrupt
Offset 86 – MII Interrupt Mask (00h).............................RW
The bits in this register correspond to bits in the MII Interrupt
Status register (Rx84). An interrupt is generated when
corresponding bits in both registers equal one.
7 Interrupt on MII Interrupt Status (Rx84) Bit-7
6 Interrupt on MII Interrupt Status (Rx84) Bit-6
5 Reserved ........................................ always reads 0
4 Interrupt on MII Interrupt Status (Rx84) Bit-4
3 Interrupt on MII Interrupt Status (Rx84) Bit-3
2 Reserved ........................................ always reads 0
1 Interrupt on MII Interrupt Status (Rx84) Bit-1
0 Interrupt on MII Interrupt Status (Rx84) Bit-0
All bits above:
0 Disable ...................................................default
1 Enable
Offset 8D-8C – Flash Address ......................................... RW
This register stores the address that is read from or written to
when reading or configuring the BootROM.
15-0 Flash Address [15:0] ................................default = 0
Offset 8F – Flash Write Data Out ................................... RW
This register stores the data that is written to the BootROM.
7-0 Flash Write Data Out...............................default = 0
Offset 90 – Flash Read / Write Command...................... RW
7-2 Reserved ........................................always reads 0
1 Boot ROM Embedded Write Command......def = 0
Setting this bit initiates a write transaction (data in
Rx8F will be written to the address specified in
Rx8D-8C).
0 Boot ROM Embedded Read Command.......def = 0
Setting this bit initiates a read transaction (data in the
address specified in Rx8D-8C will be read and stored
in Rx91).
Offset 91 – Flash Write Data In ....................................... RO
This register stores the data that is read from the BootROM.
7-0 Flash Write Data In .................................default = 0
Offset 93 – Flash Checksum (00h)................................... RW
This register stores the checksum from the BootROM after
programming.
7-0 EEPROM Checksum ............................... default = 0