Specifications

- 44 -7VT600 1394 Motherboard
English
FOnboard Serial Port 2
8Auto BIOS will automatically setup the port 2 address.
83F8/IRQ4 Enable onboard Serial port 2 and address is 3F8,Using IRQ4.
82F8/IRQ3 Enable onboard Serial port 2 and address is 2F8,Using IRQ3. (Default Value)
83E8/IRQ4 Enable onboard Serial port 2 and address is 3E8,Using IRQ4.
82E8/IRQ3 Enable onboard Serial port 2 and address is 2E8,Using IRQ3.
8Disabled Disable onboard Serial port 2.
FUART Mode Select
MThis feature allows you to determine which Infra Red(IR) function of Onboard I/O chip)
8ASKIR Using as IR and set to ASKIR Mode.
8IrDA Using as IR and set to IrDA Mode.
8Normal Using as standard serial port. (Default Value)
FUR2 Duplex Mode(When UART Mode Select isnt set [Normal])
M This feature allows you to select the IR modes.
8Half IR Function Duplex Half. (Default Value)
8Full IR Function Duplex Full.
FOnBoard Parallel port
M This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
8378/IRQ7 Enable onboard LPT port and address is 378, Using IRQ7.(Default Value)
8278/IRQ5 Enable onboard LPT port and address is 278,Using IRQ5.
83BC/IRQ7 Enable onboard LPT port and address is 3BC,Using IRQ7.
8Disabled Disable onboard parallel port.
FParallel Port Mode
M This feature allows you to connect with an advanced print via the port mode it supports.
8SPP Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)
8EPP Using Parallel port as Enhanced Parallel Port IRQ5.
8ECP Using Parallel port as Extended Capabilities Port using IRQ7.
8ECP+EPP Using Parallel port as ECP & EPP mode.