Specifications

- 25 - Hardware Installation Process

English

12) F_AUDIO (F_AUDIO Connector)

If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to

utilize the front audio header, your chassis must have front audio connector. Also please

make sure the pin assigment on the cable is the same as the pin assigment on the MB

header. To find out if the chassis you are buying support front audio connector, please

contact your dealer. Please note, you can have the alternative of using front audio connector

or of using rear audio connector to play sound.

Pin No. Definition

1 MIC

2 GND

3 REF

4 POWER

5 FrontAudio(R)

6 RearAudio(R)

7 Reserved

8 No Pin

9 FrontAudio (L)

10 RearAudio(L)

13) SUR_CEN

Please contact your nearest dealer for optional SUR_CEN cable.

Pin No. Definition

1 SUR OUTL

2 SUR OUTR

3 GND

4 No Pin

5 CENTER_OUT

6 BASS_OUT