User`s manual

35
2
Hardware Installation
System fan
2.5.5 Universal Serial Bus Ports
USB 4
USB 3
Four onboard USB 2.0/1.1 ports (Black) are at locations CN5
(USB 1-2) and CN6 (USB 3-4) of the system board.
J6 (USB 5-6) and J7 (USB 7-8) connectors allow you to connect 4
additional USB 2.0/1.1 ports. The USB ports may be mounted on a
card-edge bracket. Install the card-edge bracket to the system
chassis then insert the connector that is attached to the USB port
cables to J6 or J7.
Note:
USB 7-8: KM400A-MV/MLV and KM400-MV/MLV only.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
(“VIA OnChip PCI Device” section) of the BIOS.
"
USB 5-6
USB 7-8
"
USB 2
USB 1
1
VCC
-Data
+Data
Ground
Key
VCC
-Data
+Data
Ground
N. C.
2
10
9
!
Note:
USB 7-8: KM400A-MV/
MLV and KM400-MV/
MLV only