Setup guide

40
Using BIOS
Resources Controlled By (Auto(ESCD))
You should leave this item at the default Auto(ESCD). Under this setting, the system
dynamically allocates resources to Plug and Play devices as they are required.
If you cannot get a legacy ISA (Industry Standard Architecture) expansion card to work
properly, you might be able to solve the problem by changing this item to Manual, and then
opening up the IRQ Resources submenu.
• IRQ Resources [Press Enter]: In the IRQ Resources submenu, if you assign
an IRQ to Legacy ISA, then that Interrupt Request Line is reserved for a legacy
ISA expansion card. Press <Esc> to close the IRQ Resources submenu.
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system that does not require palette snooping so
you must leave this item disabled.
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB (if any) on your system.
Activity of the selected IRQ always awakens the system.
PC Health Status
On motherboards that support hardware monitoring, this item lets you monitor the param-
eters for critical voltages, critical temperatures, and fan speeds.
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
System Component Characteristics
These items allow end users and technicians to monitor data provided by the BIOS on this
motherboard. You cannot make changes to these fields.
• CPU Vcore
• CurrentCPU Temp
• CPU FAN Speed
• CAS FAN Speed
Shutdown Temperature [Disabled]
CPU Vcore
+2.5V
Current CPU Temp
CPU FAN Speed
CAS FAN Speed
Phoenix-AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
f
Menu Level
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
mnlk
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults