Setup guide

34
Using BIOS
Ethernet Device (Enabled)
Use this item to enable or disable the onboard Ethernet.
Audio Device (Enabled)
Use this item to enable or disalbe the onboard audio device.
Onboard USB Function (Enabled)
Enable this item if you plan to use the USB ports on this motherboard.
USB Function For DOS (Disabled)
Enable this item if you plan to use the USB ports on this motherboard in a DOS environ-
ment.
Power Mangement Setup
This page sets up some parameters for system power management operation.
Yes / No
ACPI support for
Operating System.
YES: If OS
supports ACPI.
NO: If OS
does not support
ACPI.
Help Menu
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Power Management Setup
ACPI Aware O/S Yes
Power Management Enabled
Suspend mode S1
Suspend Time Out Disabled
Resume on RTC Alarm Disabled
LAN/Ring Power On Disabled
Keyborad Power On Disabled
Wake-Up Key Any Key
S3 USB Device Wakeup Function Disabled
ACPI Aware O/S (Yes)
This itme supports ACPI (Advanced Configuraion and Power Management Interface). Use
this item to enable or disable the ACPI feature.
Power Management (Enabled)
Use this item to enable or disable a power management scheme. If you enable power
management, you can use this item below to set the power management operation. Both
APM and ACPI are supported.
Press <Esc> to return to the main menu setting page.
: Move
F10: Save
F1: General help
+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
mnkl
OnBoard SATA-IDE (RAID)
Use this item to set the SATA-IDE function mode.
Modem Device (Enabled)
Use this item to enable or disalbe the onboard modem device.