User`s manual

Installation

2-13

Wake-on LAN: WOL

This connector allows you to connect a network card with the Wake-On

LAN function. The connector will power up the system when a signal is

received through the network card. Please note that the function of ACPI

WOL may be disabled when users unplug the power cord or turn off the

power button manually.

COM2: The Second Serial Port

COM2 is a pin header for second serial port.

Pin Signal Description

1 DCD Data Carry Detect

2 SIN Serial In or Receive Data

3 SOUT Serial Out or Transmit Data

4 DTR Data Terminal Ready

5 GND Ground

6 DSR Data Set Ready

7 RTS Request To Send

8 CTS Clear To Send

9 RI Ring Indicate

WOL

COM2