User`s manual

BIOS Setup
57
ACT(0) to ACT(1) (TRRD)
This field is only available when “DRAM Timing” is set to “Manual”.
Settings: [2T, 3T, 4T, 5T]
Read to Precharge (Trptp)
Settings: [2T, 3T]
Write to Read CMD (Twtr)
Settings: [1T/2T, 2T/3T]
Write Recovery Time (Twr)
Settings: [2T, 3T, 4T, 5T]
DRAM Command Rate
This field is for setting how fast the memory controller sends out commands.
Lower setting equals faster command rate.
NOTE: Some memory modules may not be able to handle lower
settings.
Settings: [2T Command, 1T Command]
RDSAIT Mode
Settings: [Manual, Auto]
RDSAIT Selection
Key in a HEX number.
Settings: [Min = 0000, Max = 003F]
Auto Detect PCI Clk
Settings: [Disabled, Enabled]
CPU Host/PCIEX/AGP/PCI
Settings: [Deafault, 133/100/66/33MHz, 137/100/68/34MHz,
200/100/66/33MHz, 202/100/67/33MHz, 206/100/68/34MHz,
210/100/70/35MHz]