User`s manual

Chapter 3

INTEGRATED PERIPHERALS

: Move

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

Menu Level

Item Help

SuperIO Device [Press Enter]

Onboard IDE Channel 2 [Enabled]

IDE Prefetch Mode [Enabled]

OnChip SATA [Enabled]

SATA Mode [RAID]

AC97 Audio [Auto]

IDE HDD Block Mode [Enabled]

USB Emulation

[On]

Onboard IDE Channel 1 [Enabled]

Integrated Peripherals

Phoenix - AwardBIOS CMOS Setup Utility

OnChip USB Controller [All Enabled]

OnChip EHCI Controller

[Enabled]

VIA OnChip LAN [Enabled]

Onboard Lan Boot ROM [Disabled]

Onboard IDE Channel 1 and 2

The integrated peripheral controller contains an IDE interface with support for

two IDE channels.

Setting Description

Enabled Activates each channel separately

Disabled Deactivates IDE channels

IDE Prefetch Mode

Settings: [Enabled, Disabled]

IDE HDD Block Mode

This allows the hard disk controller to use the fast block mode to transfer

data to and from the hard disk drive. Block mode is also called block transfer,

multiple commands or multiple sector read / write.

Setting Description

Enabled Block mode

Disabled Standard mode

OnChip SATA

Settings: [Enabled, Disabled]