User`s manual

Chapter 3

ADVANCED CHIPSET FEATURES

: Move

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

Menu Level

If there are display cards on

both AGP and PCI slots,

configure this item for BIOS to

select which one to boot

Item Help

Advanced Chipset Features

Phoenix - AwardBIOS CMOS Setup Utility

Display Card Priority

AGP & P2P Bridge Control

CPU & PCI Bus Control

Select Display Device

TV H/W Layout

TV Type

TV Output Connector

[PCI Slot]

[Press Enter]

[CRT]

[Default]

[NTSC]

[Press Enter]

AGP Driving Control

[Auto]

AGP Driving Value

WARNING: The Advanced Chipset Features menu is used for

optimizing the chipset functions. Do not change these settings unless

you are familiar with the chipset.

Display Card Priority

This setting specifies which VGA card is your primary graphics adapter.

Settings: [PCI Slot and AGP]

AGP Driving Control

This item is used to signal driving current on AGP cards to auto or manual.

Settings: [Auto, Manual]

AGP Driving Value

Key in a HEX number.

Settings: [Min = 0000, Max = 00FF]

Select Display Device

This setting refers to the type of display being used with the system.

Settings: [CRT, TV, CRT + TV]