User`s manual

Chapter 3
68
LPT & COM
Decide whether or not the power management unit should monitor parallel
port (LPT) and serial port (COM) activities.
Settings: [None, LPT, COM and LPT / COM]
HDD & FDD
Enables the power management unit to monitor hard disk and floppy disk
activities.
Settings: [Off, On]
PCI Master
Enables the power management unit to monitor PCI master activities.
Settings: [Off, On]
PowerOn by PCI Card
Enables activity detected from any PCI card to power up the system or
resume from a suspended state. Such PCI cards include LAN, onboard USB
ports, etc.
Settings: [Disabled, Enabled]
Modem Ring Resume
Enables a modem Ring-in event to wake up the system from suspend state.
Settings: [Disabled, Enabled]
RTC Alarm Resume
Sets a scheduled time and/or date to automatically power on the system.
Settings: [Disabled, Enabled]
Date (of Month)
The field specifies the date for “RTC Alarm Resume”.
Resume Time (hh:mm:ss)
The field specifies the time for “RTC Alarm Resume”.