User`s manual

Chapter 2
20
C ONNECTORS
Hard Disk Connectors: IDE1 & IDE2
The two IDE connectors support Ultra DMA 33/66/100 modes. Both IDE
connectors can connect a master and a slave drive. The IDE connectors can
support up to four IDE devices.
If two drives are connected to a single cable, the jumper on the second
drive must be set to slave mode. Refer to the drive documentation supplied
by the vendor for the jumper settings.
EBGA
Processor
VT8601A
North
Bridge
VT8231
South
Bridge
Primary IDE
Secondary IDE