User`s manual

BIOS Setup
57
PERIPHERAL ACTIVITIES
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Decide whether or not the
power management unit
should monitor VGA activities.
Item Help
VGA Event [OFF]
PCI Master Event [OFF]
PS2KB Wakeup Select [Hot Key]
PS2MS Wakeup from S3/S4/S5 [Disabled]
PS2KB Wakeup from Suspend [Disable]
USB Resume [Disabled]
PowerOn by PCI Card [Disabled]
Wake On LAN/Ring Connector [Disabled]
RTC Alarm Resume [Disabled]
Date (of Month) 0
Resume Time (hh:mm:ss) 0: 0: 0
HDD & FDD Event [ON]
Peripherals Activities
Phoenix - AwardBIOS CMOS Setup Utility
LPT & COM Event [LPT/COM]
VGA Event
Enables the power management unit to monitor VGA activities.
Settings: [Off, On]
LPT & COM Event
Decide whether or not the power management unit should monitor parallel
port (LPT) and serial port (COM) activities.
Settings: [None, LPT
, COM and LPT/COM]
HDD & FDD Event
Enables the power management unit to monitor hard disk and floppy drives
activities.
Settings: [Off, On]
PCI Master Event
Enables the power management unit to monitor PCI master activities.
Settings: [Off, On]