User`s manual

BIOS Setup
55
POWER MANAGEMENT SETUP
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
This item allows you to select
how the BIOS put the system
in power saving mode.
S1(POS): System in low power
mode
S3(STR): All components are
powered off except memory.
S1 & S3: Depends on OS to
select S1 or S3
Item Help
ACPI Suspend Type [S1(POS)]
HDD Power Down [Disable]
Video Off Option [Suspend -> Off]
Power Off by PWRBTN [Instant-Off]
Run VGABIOS if S3 Resume [Auto]
AC Loss Auto restart [Off]
Peripherals Activities [Press Enter]
IRQs Activities [Press Enter]
Power Management Timer [Disable]
Power Management Setup
Phoenix - AwardBIOS CMOS Setup Utility
ACPI Suspend Type
Setting Description
S1(POS) S1/Power On Suspend (POS) is a low power state. In this
state, no system context (CPU or chipset) is lost and
hardware maintains all system contexts.
S3(STR) S3/Suspend To RAM (STR) is a power-down state. In this
state, power is supplied only to essential components such as
main memory and wakeup-capable devices. The system
context is saved to main memory, and context is restored
from the memory when a "wakeup" event occurs.
S1 & S3 Depends on the OS to select S1 or S3.
HDD Power Down
Sets the length of time for a period of inactivity before powering down the
hard disk.
Settings: [Disabled, 1~15(minutes)]
Power Management Timer
Set the idle time before system enters power saving mode. ACPI OS such
as Windows XP will override this option.
Settings: [Disabled, 1/2/4/6/8/10/20/30/40(minutes), 1(hour)]