User`s manual
BIOS Setup
49
ADVANCED CHIPSET FEATURES
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Item Help
CPU & PCI POST Write [Enabled]
AGP Aperture Size [32M]
AGP Mode Internal [4X]
Select Display Device [CRT]
Advanced Chipset Features
Phoenix - AwardBIOS CMOS Setup Utility
CPU Direct Access FB [Enabled]
Panel Type [640x480]
TV Layout [Default]
TV Type [NTSC]
WARNING: The Advanced Chipset Features menu is used for
optimizing the chipset functions. Do not change these settings
unless you are familiar with the chipset.
AGP Aperture Size
This setting controls how much memory space can be allocated to AGP for
video purposes. The aperture is a portion of the PCI memory address range
dedicated to graphics memory address space. Host cycles that hit the
aperture range are forwarded to the AGP without any translation.
Settings: [4MB, 8MB, 16MB, 32MB, 64MB, 128MB, 256MB]
CPU to PCI POST Write
When
Enabled
, CPU can write up to four words of data to the PCI write
buffer before CPU must wait for PCI bus cycle to finish. If
Disabled
, CPU
must wait after each write cycle until PCI bus signals that it is ready to
receive more data.
Settings: [Enabled, Disabled]