Manualshelf

User`s manual

ManualsBrandsVIA Technologies Manualscomputer componentsEPIA-EN15000G - VIA Motherboard - Mini ITX
41424344454647484950
Chapter 3
3-16
SuperIO Device
Press Enter to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Enable the onboard floppy controller. Select
Enabled when you have
installed a floppy disk drive. Settings:
Enabled, Disabled
Onboard Serial Port 1/2/3/4
Set the base I/O port address and IRQ for the onboard serial port A/serial
port B. Selecting
Auto allows BIOS to automatically determine the
correct base I/O port address. Settings:
Onboard Parallel Port
This specifies the I/O port address and IRQ of the onboard parallel port.
Settings:
Disabled, 378/IRQ7, 278/IRQ5, 3BC/IRQ7
Port Settings
1
Disabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Auto
2
Disabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Auto
3
Disabled 3F8/IRQ5 2F8/IRQ10 3E8/IRQ5 2E8/IRQ10 ---
4
Disabled 3F8/IRQ5 2F8/IRQ10 3E8/IRQ5 2E8/IRQ10 ---