User`s manual

Chapter 2
2-4
Memory Module Installation
The VIA EPIA-CL Mini-ITX Mainboard provides one DIMM slot for
DDR266 memory modules.
DDR Module Installation Procedures
1. Push the white retaining latches at either end of the DIMM slot outwards.
2. Align the DDR module with the corresponding notches on the DIMM
slot. The modules will only fit if placed in the correct position.
3. With both hands, press the DDR module down into the DIMM slot so
that the white retaining latches rotate up and secure the module in place
(see picture below).
CLE266