User manual

53
CPU FEATURE
Thermal Management
This item sets CPU’s thermal control rule to protect CPU from overheat.
Settings Description
Thermal Monitor 1 On-die throtting
Thermal Monitor 2 Ratio & VID transition
Thermal Monitor 3 Dynamic Ratio & VID transition
Disabled Disable the thermal monitor
Thermal Monitor Bus Ratio
This item sets the frequency (bus ratio) of the throttled
performance that will be initiated when one on die sensor goes
from not hot to hot.
Key in a DEC number.
Settings: [Min = 0, Max = 255]
Thermal Monitor Bus VID
This item sets the voltage of the throttled performance that will be
initiated when the on die sensor goes from not hot to hot.
Settings: [0.700V, 0.716V, 0.732V, 0.748V, 0.764V, 0.780V, 0.796V,
0.812V, 0.828V, 0.844V, 0.860V, 0.876V, 0.892V, 0.908V, 0.924V,
0.940V, 0.956V, 0.972V, 0.988V, 1.004V, 1.020V, 1.036V, 1.052V,
1.068V, 1.084V, 1.100V, 1.116V, 1.132V, 1.148V, 1.164V, 1.180V,
1.196V, 1.212V, 1.228V, 1.244V, 1.260V, 1.276V, 1.292V, 1.308V,
1.324V, 1.340V, 1.356V, 1.372V, 1.388V, 1.404V, 1.420V, 1.436V,
1.452V, 1.468V, 1.484V, 1.500V, 1.516V, 1.532V, 1.548V, 1.564V,
1.580V, 1.596V, 1.612V, 1.628V, 1.644V, 1.660V, 1.676V, 1.692V,
1.708]