User manual

49
IDE CHANNELS
The specifications of your drive must match with the drive table.
The hard disk will not work properly if you enter incorrect
information in this category. Select “Auto
AutoAuto
Auto” whenever possible. If
you select “Manual
ManualManual
Manual”, make sure the information is from your hard
disk vendor or system manufacturer.
Below is a table that details required hard drive information when
using the “Manual
ManualManual
Manual” mode.
Settings Description
IDE Channel The name of this match the name of the menu.
Settings: [None, Auto, Manual]
Access Mode Settings: [CHS, LBA, Large, Auto]
Capacity Formatted size of the storage device
Cylinder Number of cylinders
Head Number of heads
Precomp Write precompensation
Landing Zone Cylinder location of the landing zone
Sector Number of sectors