User's Manual

3301770
NOTE:
It is recommended not to change the rest of the BIOS menu options under this
category. The default setting will work properly for the majority of applications.
4.8 Peripheral Setup Selections
„ OnBoard FDC
This option allows you to enable/disable the onboard floppy disk controller.
„ OnBoard Serial Port#
This feature allows you to disable the onboard serial port or to manually select the I/O
address and IRQ for it.
„ Serial Port2 Mode
This feature allows you to assign serial port2 to function as the IrDA device connector.
„ On-Board Parallel Port
This option specifies the base I/O port address of the parallel port on the motherboard. The
settings are Disabled, 378h, 278h, or 3BCh.
„ Parallel Port Mode
This option specifies the parallel port mode. The settings are Normal, Bi-Dir, ECP, and EPP.
Normal:
The normal parallel port mode is used.
4-17