User`s manual

60
4
Supported Softwares
You must first install VIA
®
Service Pack prior to installing any other
drivers. However, this may not be the case for some AGP cards.
Please read carefully the information below.
Important:
The VGA driver that came with some AGP cards (Asus,
Leadtek, etc) is already bundled with the AGP VxD driver.
Since the version of the bundled VxD driver may be older
than the one provided in the CD, installing the bundled VxD
driver may cause problems. If you are using this type of card,
we recommend that you install first the AGP cards VGA driver
before installing the VIA Service Pack.
To install the VIA Service pack, please follow the steps below.
1. Insert the CD that came with the system board package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click VIA Service Pack.
3. The Welcome screen will appear. Click Next. Please read the
VIA Service Pack readme carefully before proceeding to step 4.
4. Follow the prompts on the screen to complete the installation.
5. Reboot the system for the drivers to take effect.
4.4 Drivers and Utilities Installation Notes
1. "Autorun" ONLY supports the Windows

95, Windows

98,
Windows

2000 and Windows NT

4.0 operating systems. If
after inserting the CD, "Autorun" did not automatically start
(which is, the Main Board Utility CD screen did not appear),
please go directly to the root directory of the CD and double-
click "Autorun".
2. Please go to DFI's web site at "http://www.dfi.com/support/
download1.asp" for the latest version of the drivers or software
applications.
3. All steps or procedures to install software drivers are subject to
change without notice as the softwares are occassionally updated.
Please refer to the readme files, if available, for the latest
information.