THE STANDARD 18 HEAD 18W Handwired Head User Manual
Table of Contents Table of Contents............................................3 Product Safety Information............................4 Panel Functions...............................................5 Technical Specifications.................................
Product Safety Information Panel Functions (Please refer to Fig. 1 and Fig. 2 for details.) WARNING! Please read ALL Safety & Operating Instruction BEFORE using this product. A. THE FRONT PANEL CAUTION: To avoid the risk of fire or electric shock, please do not expose this product to rain or moisture. Dangerous high voltages are present inside the enclosure. Do not open the cabinet or remove either the front or the back cover. Refer servicing to qualified personnel only.
. Master: Overall volume adjustment for both channels. Turn this knob clockwise increases the overall sound level. B. THE REAR PANEL CH 2 (Channel 2): 5. Bass: Adjusts the low frequency level. Turn this knob clockwise to boost the bass sound, counter clockwise to cut the bass sound accordingly. Center position (straight up) provides no cut or boost. 6. Mid: Adjusts the middle frequency level. Turn this knob clockwise to boost the middle sound, counter clockwise to cut the middle sound accordingly.
Technical Specifications Name/Model VHT 18W Handwired Head / THE STANDARD 18 HEAD Total Output Power 18W RMS Amp Type: Tube Amp (Handwired) Pre-Amp Section: (3) 12AX7 Tubes Power-Amp Section: (2) EL84 Tubes Rectifier: (1) 5Y3GT Tube Controls: Standby, On/Off, Master, Bass, Mid,Treble, Gain Channel 2, Tone, Gain Channel 1 Notes EQ: Channel 1- Tone Channel 2 – Bass, Mid, Treble Reverb: N/A Channels: 2 Jacks: Channel 1 Input Lo, Channel 1 Input Hi, Channel 2 Input, ¼’’
Notes 10 Notes 11
Limited Warranty Information This amplifier is warranted, to the original Purchaser, to be free from defects in material and workmanship for a period of one (1) year, excluding the Tubes, which are warranted for ninety (90) days, from the original date of purchase. The manufacturer shall, at its option, either repair or replace the defective product if the product is returned to the original place of purchase.
