User`s manual

The above setting is used when DVR is real IP address (ISP will
provide fixed/real IP address or the IP address received from ADSL
connection), or DVR and the computer using IE browser is under
stand LAN network.
If DVR is under Router or IP share, you will require setup up NAPT
(Network Address Prot Translation) from your Router or IP share. As of the
differences of IP share and Router, please check the user’s manual for your
Router and IP share for setup.
We would set an example here using ASUS’s Broadband Router with 4 port
Switch ( Model RX3041) for an easy explanation of how to remote.
You will require few setup details. Assume that there are 2 DVR (DVR_1
and DVR_2) behind router.
1. IP address (Outside) for this router is 111.112.113.114. (Please setup
the IP address using your own network IP address). Setup as below:
90