User`s manual

Double click by the right mouse on the server name to exit the remote
monitoring
Note:
1. All of the Chateau systems connected to a same ChateauServer
will be shown on the Host menu; however, you still need the access
auditing granted by these remote hosts to perform remote
monitoring at those remote hosts. (The remoted host need to set
it’s user name and password in the remote host.)
2. Chateau system still needs to connect ChateauServer programs
even when operating in the same computer.
81
9.2 P to P remote control
Chateau not only can provide remote connection for many systems
through ChateauServer program, and can also provide P to P single
connection function. You will not require starting ChateauServer Program
for this. Please take notice of the connection way. The PC DVR or the
Embedded DVR remote to or for remote will have to be under Real IP.
Or both sides will be under the same section of the LAN. Click
button and the remote monitoring page will pop up. Select PC DVR or
Embedded DVR for connection (Address setup please refers to
Chapter
3.9 Address Book for more information). Double click the left button of the
mouse to connect to the require system. After connection, the status from
the status column will display as connected as below:
Under Host Control Panel, the connected P to P hosts will be displayed.
Double click on the left hand side of the mouse to switch to the remote
system for remote control. The system will automatically display the split
window images from the remote site. And the host name will be
automatically switched to the remote host name under status panel.
9.3 Remote host system setup control function.
Remote control will be different according to the login user’s authorizations.