User`s manual

Chapter 9: Remote Access
Chateau System can transmission video files and control, activate remote
control through TCP/IP supported LAN or Internet.
LAN can provide wider bandwidth for the transmission of the larger files.
The speed for remote under LAN is almost the same as the local site.
Click
button, the Remote access selection window will come to
screen. When you have already set up the Address Book as instructed in
Chapter 3.9 Address Book. Window will automatically pop up for the
available ChateauServer, or P to P connection’s Chateau Host or
Embedded DVR for connection.
9.1 Remote control using ChateauServer
First, you need to define the names and passwords, log in the name and
password to the local Chateau system, then connect to ChateauServer
Program, and finally connect to the remote Chateau system. Those three
groups of user names and passwords must be completely identical so as
for the program to automatically complete the user auto-login. For defining
user access auditing, please refer to
Chapter 3.5 User.
Click
button, and select TCP/IP option. Select the ChateauServer
to connect. Double click on its name to connect to ChateauServer. After
connection is established, the Status field shows Connected as illustrated
below.
Click OK button to end the remote monitoring menu. All the hosts connect
to this ChateauServer will be appear on the Host control panel. Double
click to the system host for remote monitoring, switch to the remote host for
remote monitoring; then the display window will be change to the remote
host split window.
80