User`s manual

ChateauServer program after the computer powered-up, so as to
match with the Automatically connect to server function of the
Chateau application program.
8.2.4 Web service
Active the web service for the ChateauServer program. All the
connected hosts, include VGN Embedded DVR or PC based DVR
can be monitored by this web service. Please refer to Chapter 9.7
Remote DVR Using IE Browser for more information.
8.2.5 Exit ChateauServer Program
To exit ChateauServer program, the program will demand that the
user input his/her password as a confirmation in order to avoid
accidental or unauthorized termination.
8.2.6 Listenning port setup
Firstly you will require to login ChateauServer program, and
shutdown Server before you can change the setting of listening port.
Click the Manage and the below menu will appear:
Select Listening port setup to open dialogue:
When this port is changed, user will also required changing the
server’s communication ports from the network setting for VGuard N
series and also the communication ports from the address book setup
for Chateau System. The value will need to be the same.
8.2.7 IP Setup
IP Setup can allow or limited the remote Chateau System of remote
Embedded DVR to connect to this server. Click the Manage and
select IP Setup then the dialogue will appear:
IP Manage modes are as follow:
1. Shield the IP address listed below: IP addresses listed here are
the IP addresses not allow to be connected. Under this mode, all
75