User`s manual

After finishing preset point

setup, you can have Chateau

Programs supplemental

function, i.e. “Cruise”. Cruise

allows you to have the cameras

to fast move in a user-defined

sequence and to define the

camera stay-time at each point.

Click

at the right of Cruise

button on the PTZ control panel

to enter into the Cruise Setup

screen:

Select the Preset point first and

then input the Dwell time. Click

Add button to complete the

setup. Users may arrange the sequence of the Preset point and the

Dwell time at each point as desired. To delete the preset point, select

the preset point name and click delete. Cruise is the fastest speed

for cameras to move to each preset point. Some dome cameras

may not support these functions. Users need to check with

vendors in advance.

7.3 Output Port Control

Click on the main function panel to display

control panel. Click

to switch to output control

panel like the left. You can click

arrow to select

set output device and click the output point name to

control the on/off of that point. Please refer to

Chapter7.1.5.2 Output Port signal type setup for more

detail.

A remote connected user with the authorization to

control remote I/O device can also remote control the

I/O devices from this control panel.