User`s manual

- Mikami PTC103A speed dome camera
- Sensormatic speed dome camera (RS422 Interface)
- Philip CSS speed dome camera (Require Philip’s own
RS232-485 converter. Other converter might not be able to
connected and control Philip’s camera)
- SamSung speed dome camera
- Panasonic WV_CS850 speed dome camera
The addresses range for each speed dome camera was different,
please refer to its user’s manual for address setting and control
signal connection details.
The control code of each manufacturer is different and incompatible
to those of others. Do not mix-use different vendors’ devices on a
same COM port. The address of each device on the same COM
port must be unique (different from each other). Please input the
address in hexadecimal format to avoid any control error.
 VGIO
VGuard boards’ VGIO provides with 8 digital inputs, 8 digital output
and watchdog functions.
7.1.2 Adding an I/O device
Click the New button to add an I/O device as follow.
Devices can be separate into two types, IO devices and PTZ camera,
please setup correctly.
- Device name: Give the device a name for easier and correctly
setup.
- Device type: Make sure of the correct type of device. The
problems that some devices can’t solve.
- Connect port: Some I/O devices’ and PTZ camera’s output
controls base on RS-232. Please make sure to connect to the
correct COM port.
- Hexadecimal Address: Part of the IO and PTZ camera can
be connected to one or more devices. Preset of the address on
the device is a must. Address setting here must be the same to
the device to avoid error in control.
When finish, click the Ok button to saved and exit the screen.
7.1.3 Deleting I/O device
Click the right button of the mouse on the I/O device that wanted to be
deleted; click delete then the device will be removed from the list.
(Only System Administrator can delete a device).
67