User`s manual

button, the following Schedule window displays.
 Adding a new alarm schedule:
Click the New button to add a new
schedule. There are four repeat
modes with alarm schedule: Only
Once, Every day, Every Week and
Every month. First, select the
desired repeat mode. Then, input
start/end day (week) and time into
the boxes to the right of “From” and
“To” fields. You may input directly or click the arrows to the right of
the fields, and click OK button to add a schedule to the list.
Note: If the time to be set crosses 12:00 of the midnight, it is
recommended to split the schedule into two, e.g. Split
PM6:00:00~AM9:00:00 into “PM6:00:00~PM11:59:59”
and“AM12:00:00~AM9:00:00”.
 Editing the schedule:
Click the desired schedule and click the Edit button or double
click the mouse to edit the schedule.
 Deleting a schedule:
Click the desired schedule and click the Delete button to delete a
schedule. (Only the System Administrator can delete a
schedule).
 Closing the schedule window:
Click Close button to exit the window.
6.1.3 Alarm Actions
The alarm actions can be separate into Local Alarm and Remote
Alarm. Listed below are four items:
 Playing alarm sound: This is local alarm. When this is enabled,
Chateau System will play the assigned alarm sound file when
alarm triggered. Select this option and click Select button, the
Alarm sound file dialog will pop up. Select the wanted sound files
and click OK. The name of the sound file will be display on the
playback column to finish the alarm sound file selection.
 Snapshot: This is local alarm. When this is enabled, Chateau
System will snapshoot the image when alarm triggered. The
62