User`s manual

1. Triggered by image alteration in motion detection area.
2. Triggered by “Video lost”.
3. Triggered by (sensor) signal from the input port (please refer to
Chapter 7: IO Device for more information.)
6.1 Alarm Setup
Each camera has its own independent alarm setting. You can find the
related activation options and setting buttons in Camera Setup dialogue
window on the Camera Setup Section.
You need to tick enable of the alarm in the alarm setup before you can
setup the alarm. By click the Setup button to enter into the alarm setup
window.
6.1.1 Alarm Event Period
This is to set the length of time that an alarm will last. No new alarm
will be triggered during this duration. The default value is 180 seconds.
The minimum is 10 seconds. It is recommended to set the value for
more than 60 seconds.
6.1.2 Activate condition
You may activate alarm functions by a predefined Schedule table.
After you select Activate by schedule table and click the Schedule
61