User`s manual

Chapter 5: Playback

In the following description, you will be able to find the saved video file and

load picture function as follow.

5.1 Video Playback

Click button. The system function panel will switch to the playback

function panel:

You can search for the video files you want to playback, but you will need

to input the Host ID and the search option.

5.1.1 Parameter Mode

 Search By Date:

To search for video files by date (including year, month and day).

 Search By Time:

To search for video files by the start/end date and time (including year,

month, day, AM/PM, hour, minute and seconds)

 Search By Host name:

Searching of the host name include the host name itself and the

connected remote hosts. （Searchable vieo files is the files save in

HDD, include the recorded files saved from the local system, file

saved during remote monitoring, but not include the recorded files

saved in the HDD for the remote system）.

 Search By Camera:

Only the cameras which had saved video files can be selected. If no

files in it, then it can’t be selected.

Note: Maximum of 4 cameras can be chosen in one time. You need

to play the files chosen to be able to select another 4 cameras

needed. You do not need to exit the played file to have more

than 4 cameras playing at the same time.

After selecting the searching parameters, click the Play button to play.

Below picture is showing you the playback of 4 files at once.