User`s manual

Every cameras have the same optional and functional settings. Each

setting is detailed as follow..

 Camera function setup

- Enable Camera: The image will only be shown relatively in the

image section when this function for each camera ticked.

It also means the activate of the camera.

- Enable recording (R): Select this function to activate camera

recording. If not chosen, the camera will be under

monitoring mode. It only display image not recording.

- Display image (D): The image will only be displayed when this

function is selected. If not selected, the image will not

be shown. But if the recording function is activated, it

will not be affected. (It will display “working”)

- Enable Audio recording (A): When the function is selected,

the recording of the audio will be activated when video

recording is activated.

- Check video lost (L): Every camera has its independent check

function of video lost. When the option is selected, any

reason that makes the camera lost the signal may

trigger the alarm function.

Noted: Enable alarm option must be selected and

setup for this function to activated.

- Enable Alarm: Selected this function to enable the alarm

function. After it is enable, the alarm setup can be done

by pressing the button on the right hand side. (After

enable the alarm and finish the setup procedure,