User`s manual

4.2.3
Unmask Motion Detection Area
By pressing the
button in the status panel lets you cancel all of
the motion detection areas of the designated camera.
4.2.4
Snapshot
This button lets you capture still images during recording. (This
function works only when cameras are turned on.) Images are saved
as JPG file format. The system will automatically name the file and
save in the database or in the file path by the setting in the host.
Please refer to
Chapter 5.3 Load Snapshot/Print Snapshot for more
detail.
4.2.5
Video Configuration
This button lets you change the video
configuration of a camera. Click the
button
in system status panel. The video configuration
dialog will pop up like the left hand side. Simply
drag the respective buttons to adjust the
image’s brightness, contrast, saturation and hue.
To return to the system default settings, click
the Default Colors button.
4.3 Recording Setup
To preset the recording function before camera activated. Please refer to
the following for more details.
4.3.1 Camera Setup
You need to preset the camera function before activate recording like
below.
48