User`s manual

- Host setting: If the cameras belong to the same host, by
clicking the
icon you can create a map for this host.
Setting is the save as the level setting above.
Note: To set the next level e-ma, you have to setup that level’s e-map first.
Click Add button at the last level e-map name to select the next level
e-map. Please refer to Add new e-map to finish the setting. The following
menu will show:
It is suggest setup all tree type e-map setting before you edit the
correspondence camera position and number to the e-map.
 Delete E-Map: To delete a camera entry from the list, click on
the desired entry and then click Delete button. The camera
entry then is deleted.
 Close E-Map: Click Close to exit the E-map Setup function.
3.11.2 E-map Operations
Click
from the setup functional panel, the following E-Map
dialog will be show. Double click on the camera logo
on e-map.
It will switch to the main picture of the correspondence recording host.
The camera that the camera logo correspondence to will have
points to. Click the right button of the mouse to the selected camera
will see the camera’s properties. Click the right button of the mouse to
the level button will see the level’s properties. Double Click
will
jump back to the host’s recording display.
43