User`s manual

- Add Camera: To add a camera onto the map, click
button on the left upper corner; the cursor then turns to “＋”,
Move the cursor to the desired position and then click left
button of mouse to finish the camera location setup. As
illustrated above, the red arrow points to the newly added
camera. After setting, the Camera Properties dialog will pop
up.
- Camera Selection: Double click
the camera
properties dialog will pop up as below. You can then setup
the desired Host name, VGuard card and Camera number.
Click OK to combine camera with E-Map.
- Level Setting: Select the
button on the left upper
corner to add the level button on the map. The cursor then
turns to “＋”, Move the cursor to the desired level button
position and then click left button to finish the button location
setup. After setup, the map level property dialog will pop up.
- Map Level Selection: Double click on the level button, and
then it is to establish the next e-map correspondence with
this e-map position. In this way, you may combine this
e-map with the next e-map. This function can combine
e-maps to become a multi level e-map structure.
42