User`s manual

3.7.2 Edit My Channels
Select the name of the “My Channels” for editing. Click the Edit
button to edit the appointed “My Channels”.
3.7.3 Delete My Channels
Select the name of the “My Channels” to be deleted. Click the Delete
button to delete this “My Channels” setting.
3.7.4 My Channels operation
On the host panel on the right of the main screen, by clicking
or
button, the panel will change from host panel to “My Channels”
panel as follow.
 When double clicking the “My Channels” name set (My channels
function allows the setting of one or more different monitoring
combinations. After giving the monitoring combination a name,
all the setting combination name will be display here), the screen
will then display the division images (4 divisions, 9 divisions and
16 divisions) set under the My Channels. Click the REC button,
Chateau system will then remote monitoring according to the set
host and cameras. Click the Stop button; the cameras from the
remote host will be stopped.
 Whether the camera from the local host is recording or not can
only be decide in the camera setting from the local host. Start
and stop of the local host camera can only be controlled under
host mode to avoid influence of the normally recording when
stopping local and remote end cameras under “My channels”
mode.
 Changing to other “My channels” setting only need to double
click the left button of the mouse on the selected monitoring
name. (The remote cameras from the original “My channels” will
still be connected or recording, unless the stop button is clicked).
The new “My channels” images will be displayed.
Note:
1. You will have to have the authorization from the remote host.
(Please refer to
Chapter 3.5 User for authorization setting).
2. Using “My Channels” mode to monitor remote cameras, its
meaning and position is the same as the remote monitoring
under the host mode. When you click the “Stop” button under
35