User`s manual

- Name: Name used to setup My channels combination
- Content: No function in this section
- Split screen: It is used to select the split screen that you want to
display. (The number of the camera images), it can be
distinguished into 3 combinations of 4 divisions, 9 divisions and 16
divisions. The cameras correspondence positions are different
under different divisions. Please be aware of it.
4 divisions: A, B, E and F
9 divisions: A, B, C, E, F, G, I, J and K.
16 divisions: All 16 positions from A-P.
- Record: This is to set whether the monitoring images to be
recorded and saved. If the select camera is under local host, then
this function cannot be selected. Whether the camera in the local
host is recording can only be changed under camera setting under
the local host server.
- Host: The entire connected host name will be shown here. Select
the host name in the appointed position means to display the
camera images under this host in this position. When setting,
remote host have to be under connected status to be able to add
in. After setting, the remote server can be under disconnecting
status. At this time, when “My channels” is activated, the
appointed position will be blank and shown the bottom picture.
- Camera: After the setting of the host, the entire camera name
from the selected host will be show here. Select the camera to be
monitored under this position. When the host has not been
selected, then no selection will be available here.
After all settings are finish, click OK to add a new “My Channels”
setting.
34