User`s manual

29
 E-Mail From:
Please enter the e-mail address from the sender to let the receiver
knows who is sending this e-mail. (This e-mail address has to be filled
in. Cannot leave as blank)
 E-Mail To:
Please enter the receiver’s e-mail address. And also ensure that this
e-mail is valid and can receive mails to avoid delay
 E-Mail Retry time:
Due to some cause that the mail cannot be delivered, Chateau
system will keep retrying for the set times to assure the mail can be
send successfully. (The default is 3 times; user can change the time of
retrying.)
 E-Mail Retry Interval:
The interval time for each retry. (Default is 60 second. User can make
alteration to need)
 Mail Server Authorization:
Parts of the mail server have authorization function to make sure
whether to send the mail. If using this kind of mail server, please
activate this authorization function and enter the user name and
password to assure the mail can be send successfully. If the mail
server does not have this authorization function, then no need to
activate this function.
 Camera Trigger:
This selection is to set for the e-mail for the camera to deliver alarm
messages and its content. You have to activate the alarm function for
each camera. Only the camera with the alarm function can be set
here.
 Camera Selection: Only the camera with the alarm function
activate will have a square in front of the camera name for
selection. Otherwise sending of messages using e-mail will not be
functioned. (If only the camera is selected, e-mail will only send
the alarm messages in word text).
 Sending Image Files: V stands for Video, which means image files.
The image files will be sending through E-mail when alarm
triggered when this function is selected. (This image files saved in
the alarm folder, if system is under all time recording status, then
this file will have Pre Alarm images)
 Sending Snapshot: P stands for Picture, which is a snapshot file.
The snapshot will be send through e-mail when alarm triggered
when this function is selected. Before this function is selected, you
will need to set for the snapshot function under alarm function for
the camera. Otherwise this function will not be able for selection,
as no snapshots files are available. (The snapshot is saves as
BMP format under the picture files in the database when alarm