User`s manual

 Automatically launch Chateau Program:

Allow you to setup automatically function to launch Chateau

application program upon PC startup.

 Automatically Record:

Allow you to setup automatically function to start recording upon

Chateau program startup.

 Automatically connection to server:

Allow you to setup automatically function to connect ChateauServer

application program upon start-up. The system will automatically

connect to the same ChateauServer connected previously. If the

ChateauServer could not be found, the system will keep connecting

to the ChateauServer program until it is found.

 Automatically power off the system:

If this function is enabled, the system will be shut down when a

System Administrator exit the Chateau program. If this function is

disabled, it will only exit the Chateau program.

 Automatically reset the system:

If this function is enabled, the system will be reset when a System

Administrator exit the Chateau program. If this function is disabled,

it will only exit the Chateau program.

 Soft auto reset system:

If this function is enabled, the system will be reset and restart

Chateau program at the schedule time.

Click the Setup button, the “Automatically reset” dialog will be display

for the setting of the automatically reset time interval. Only one of the

following times can be selected to setup this function.