User`s manual

and spf). Chateau System automatically adjusts the recording speed

to the maximum speed of the CPU if the specified speed exceeds the

PC maximum speed for image processing. (The default value is 30

fps in NTSC system and 25fps in PAL system)

 High Quality Recording (HQ):

When this function is selected, this will provide finer recording image

quality. However the file size will be increased. Enable of this

functions have to be noted of the hard disk spaces requirement to

avoid any problems due to not enough space available for saving.

Note: Only VG4C-XP/-V and VG4/8C-RT supports this HQ

function. VG4C/8C-RT4 is using totally hardware compression;

so all cameras can activate this high quality recording function.

For VG4C-XP/-V, it is using software compression, so it is limited

to the system resources. When installed with 4 cards, only 2

cards can enable this high quality recording function (8

channels); when installed with 3 cards, then all three cards can

enable this high quality recording function (12 channels). Please

take notice of this.

 Full Speed recording when alarmed:

Suppose that the camera is setting at a lower recording speed, when

alarm triggered, the camera recording will be at full speed when this

function is enabled.

 Exit:

Click OK to finish setting.

3.2 Camera Setup

Selected Camera and the camera system setup menu will be shown.

Please refer to

Chapter 4.3 Recording Setup for more detail.

3.3 Host Setup

The following setup menu will appear when Host is selected.