User`s manual

Note:
‧ Setup should be set under “Not Recording” status for the system
to be saved and valid.
‧ A Chateau system can install a maximum of 16 cameras. It
supports 4 VG4C-XP/VG4C-XP-V/VG4C-RT4 Cards or 2
VG8C-XP-TV/ VG8C-RT4 Cards. There will be a maximum of 4
setting areas for VGuard boards under this menu.
‧ If VG8C-XP-TV or VG8C-RT4 is installed, then you will appear 2
setting areas for one VGuard card under this menu. (One for
VGuard card and the other one for the expansion board)
‧ After successfully installed the VGuard driver and software
application, when activate the Chateau program, the program will
automatically detect for the numbers of VGuard card installed.
 Video Standard:
This is for the setting the frame sizes for image displaying, processing
and storing. You can select either NTSC or PAL system according to
the camera you are using.
Frame size for NTSC system: 640x480: 640 pixels by 480 pixels.
Frame size for PAL system: 704x576: 704 pixels by 576 pixels.
 Name:
The defaulted is VGuard card Number (N) (N=1~4). You can also set
a name easier for you to identify for easier managing the whole
security network.
 Recording Speed:
This is to specify the recording speed, either in fps (frame per second)
or spf (second per frame) (Clicking this button to switch between fps
22