User`s manual

the motherboard with JP2 (1、2) on the VGuard card. Then connect

JP2 (3、4) to the reset switch on the computer panel for automatic

launch function. (Connect to any VGuard card is workable. But the

watchdog functions on the card need to be enabled. It is

recommended to enable all watchdog function on every card for

smoother watchdog function.)

4. Place the PC casing cover onto your computer and plug it in.

5. Plug the “Video out” of the camera into the “Video in” of the VGuard

card.

6. Plug the “audio out “cable of the microphone to the “Mic-In” jack of the

VGA card; or connect the audio out from the camera to the audio in of

the VGuard card.

1.5 Installing Hardware Driver for VGuard card

Plug in and Turn the PC on. Please login the window OS with an authorized

user. Once powered up, Windows’ PnP feature automatically detects

VGuard card and requests for installing the driver. Load the included

Chateau system CD into your CD drive. Direct Windows to the path where

drivers are stored, e.g. D:\WIN2000_XP\Driver7146 (This is the driver file

name for VG4C-XP/-V, and VG8C-XP-TV. Driver file name for VG4/8C-RT4

is Driver_dm642). Please select the correct OS path. (D: refers to the path

for CD drive. This will be different according to different computers). Follow

the instructions on the prompted screens to proceed with the rest of the

installation.

For Multi cards system, it is suggest installing all cards on PCI slots, and

following the steps above for VGuard driver installation.

1.6 Installing Chateau Application Software

Before installing Chateau application software, please ensure that VGuard

card hardware drivers have been successfully installed.

Note: It is recommended updating your OS system and VGuard driver to

its latest version before installing the Chateau application software.

1. Enter Windows operating system.

2. Put the Chateau system CD into your CD-Rom drive.

3. After double Click “My Computer”, double click the CD-Rom drive.

(Chateau_EN (D:)). Double click the correct operating system

(WIN2000_XP)

Note: E: refers to the path for CD drive. This will be different

according to different computers

4. Double Click “ChateauSoftware” and then double Click “Setup.exe”.

The following installation picture will appear on the screen.