User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator（）
- Recording Indicator（）
- Playback Indicator（）
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player
8
Monitoring and Live Monitoring at the same time.
12. Sensor Input Trigger Alarm
13. Video Lost Trigger Alarm
14. Motion Image Trigger Alarm (maximum of 4 motion detection areas
per channel)
15. Alert Alarm: Sound Alert and relay output
16. Alarm Record Function: The system will start recording with 3-5
seconds pre-alarm after alarm triggered.
17. Alarm Log: Record the alarm activated time, alarm source, also select
the time from the alarm log directly for playback.
18. Playback (Search) mode: Playback directly by selected time, search
by saved time log, and by alarm log.
19. Playback Speed mode: Fast Speed forward x2, x4, x6
(RT4/HRT4)
, and
x8
(RT4/HRT4)
. Slow Speed forward /2, /4, /6, /8. Single frame playback,
Paused, Forward Skip Playback, Reverse Skip Playback.
20. Playback Display: Full Screen display, 4 split windows display.
21. File Backup Function: Supports USB disk for backup, or retrieving files
from appropriative remote software.
22. Playback backup files: Playback using VG Player (V5.4 or above)
directly from a computer.
23. Remote monitoring software: Installed Chateau (V5.0 or above) on a
PC for Remote monitoring or recording.
24. Firmware Update: Firmware update available from our website at
www.vguard.net update/ add / alter the software through USB devices.
1.3 Package Content:
Please be cautious when opening up the package to avoid damage to the
system.
1. One VGuard N Series DVR System
2. One Power Cable and IDE Cable
3. One User’s manual
4. One CD-ROM
5. 2 IO connections Jack. (Optional with VGIO)
6. Connection cables:
VGN16C-SRT4: 4* BNC jacks video connection cables. 1* RCA